× CDS - Chlorine Dioxide Solution: Chlorine dioxide gas put in water

Testing CDS to Have 3000ppm

  • tyroner
  • Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
28 May 2014 19:20 #44775 by tyroner
Testing CDS to Have 3000ppm was created by tyroner
Hi, My name is Tyrone. First I want to thank all of you for the wonderful work you'll are during. My concern is with testing with the ' CHLORINE DIOXIDE'' test strips. You sent me some instructions on how to mix the CDS 3000ppm. The test strips that you have is the same ones I have ( INSTA-TEST ANALYTIC 0 - 10 - 25 - 50 - 100 - 250 - AND 500 ). There is no 300 color testing chart for me to match to, to determine a 3000ppm strength of my final CDS SOLUTION. I have searched the web,, called numerous water purification companies, but with no success finding test strips that have a 300 color test square included in the scale.Tell me, what do you suggest. Thanking you in advance for your help.


Please Log in or Create an account to join the conversation.

28 May 2014 19:38 - 28 May 2014 19:38 #44776 by pam
Replied by pam on topic Testing CDS to Have 3000ppm
Hi, Tyrone, It's because you are not testing the way you anticipate. You're not testing to a specific number on the testing strips. The initial CDS is going to be WAY too strong to just dip and read, so you will need to dilute it to test.

Add 1ml of CDS to 1 oz of distilled water. Measure with the testing strips, will probably measure 100 (should, or close, if you have 3000 ppm) - One way to think of it is 30x100=3000


Archbishop - Genesis II Church of Health and Healing - Washington State
pam @ genesis2church.is (remove spacing)

Jim Humble's MMS Books
MMS Video Course
MMS Testimonials
MMS Newsletter

Easy, free way to support Jim Humble, Genesis II Church, MMS
Last edit: 28 May 2014 19:38 by pam.

Please Log in or Create an account to join the conversation.

Go to top