Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: SAFETY PRECAUTION - sodium chlorite solution by Jim Humble

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 00:22 #52012

  • RevPaul
  • RevPaul's Avatar Topic Author
  • Offline
  • Minister of Health
  • Minister of Health
  • Posts: 162
  • Thank you received: 170
Taken from "MMS Health Recovery Manual" by Jim Humble

I suggest that you never use MMS (sodium chlorite solution) without mixing it with citric acid, HCl, or another proven food-grade acid to activate it. Once it is activated, you should always mix it with water before consuming it or applying it to the skin (the amount of water you add varies according to the protocol). Sodium chlorite is otherwise highly alkaline (pH 13) which is considered highly corrosive; and it can leach metal, producing metal compounds that could be deposited into the human system. In some cases where an individual has certain types of stents or other metal in his body, consuming sodium chlorite without adding acid or making sure stomach acid is produced, could cause heavy metal poisoning over a long period of time—a few months to a year.
The following user(s) said Thank You: Edwin3110, Truthquester, fourfingerz

Please Log in or Create an account to join the conversation.

Last Edit: by RevPaul.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 03:33 #52013

  • Truthquester
  • Truthquester's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 853
  • Thank you received: 730
What if you put 1 drop of MMS into 100ml of water in a glass, stirred it with a plastic spoon and drank it? Just one drop?

Thanks,
Scott

Please Log in or Create an account to join the conversation.

I'm the creator of CDH with the help of CLO2 (Charlotte Lackney)
1 drop of MMS (at 24 drops per ml) contains 6.7mg (6700ppm) of CLO2
Every ml of CDH contains 1 drop of MMS
Therefore, 1 drop of MMS = 1ml of CDH
The main difference is that the drop of MMS is only 7 to 10% activated in the cup before being consumed while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 05:33 #52014

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1785
  • Thank you received: 1718
A similar scenario would be to follow Steve's "MMS for Household Uses" information .

An excerpt is:

POTABLE WATER STORAGE
Be sure container is clean.
Add 2 drops of UNACTIVATED MMS for each gallon (4 liters).
Seal tightly. Water will stay fresh, taste great, and be odor free.
When you open the water, add 1 drop for each remaining gallon (4 liters) and reseal.

The following user(s) said Thank You: Truthquester, fourfingerz

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf
Last Edit: by CLO2.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 13:12 #52017

  • Truthquester
  • Truthquester's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 853
  • Thank you received: 730
Thanks CLO2.

So that's a total of 3 drops per gallon.

Of course 3 drops in a gallon is far more diluted than 1 drop in just 100ml but it's nice to know that that amount has been approved.

I just tested 100ml of my water and it's pH is coming up at 5. I then added just one drop of unactivated MMS to the 100ml, stirred well and tested it again and it was then just barely over 5 pH. Then I added an additional 4 drops (so a total of 5 of drops of MMS in 100ml) and it still wasn't quite at 6 pH yet. So then I thought there might be something wrong with my pH test strips and so I poured out 75ml from the original 100ml and then added 5 more drops of MMS and that caused the pH to shoot up to about 10 - so I then knew my test strips were working.

I did the math on how many drops (at 20 drops a ml) are in 100ml of water and it came out to be 2000 drops and since my dropper of MMS produces 20 drops per ml, when I put 1 drop of MMS in 100ml of water I'm actually adding it to 2000 drops of water and so that's a 2000 times dilution! So no wonder the pH of my 100ml of water basically stayed the same when I added 1 drop of MMS to it.

So back to my original question Rev. Paul. Would it be okay to put just one drop (or maybe 2) in 100ml of water, drink it and allow our stomach acid to activate it? The reason why I'm asking is because it sure would be great to give someone a liter bottle of water with just 10 drops of unactivated MMS in it and instruct them to drink 100ml every hour. There are no taste or smell issues to turn them off to it so taking it would be easy for them. Also you don't have to worry about the bottle being struck by UV light or getting warm. Since it's clear, looks just like water and has no smell, nobody would even know that you are getting CLO2 into your system.

Anyway, it just seems like it might be a good way to go. I know there would not be as much CLO2 getting into the body per dose this way, so healing might take longer, but it might be a good trade off for people who can't stand the taste or smell of activated MMS any longer or for a newbie to MMS. What do you think?

Looking forward to your reply :)

May you be well.
Scott
The following user(s) said Thank You: CLO2

Please Log in or Create an account to join the conversation.

I'm the creator of CDH with the help of CLO2 (Charlotte Lackney)
1 drop of MMS (at 24 drops per ml) contains 6.7mg (6700ppm) of CLO2
Every ml of CDH contains 1 drop of MMS
Therefore, 1 drop of MMS = 1ml of CDH
The main difference is that the drop of MMS is only 7 to 10% activated in the cup before being consumed while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops.
Last Edit: by Truthquester. Reason: Added a little color :)

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 18:49 #52022

  • KatieK
  • KatieK's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 0
I have metal fillings which I plan on removing once I have dental insurance again, is this protocol contradicted then?

Please Log in or Create an account to join the conversation.

Last Edit: by KatieK. Reason: typo

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Apr 2016 21:40 #52024

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1785
  • Thank you received: 1718
From Jim's latest book Health Recovery Guide ,

For a number of years people around the world have been successfully using MMS1 to keep their mouths in shape and to overcome various teeth and gum infections. You don’t have to worry about the alkalinity of the sodium chlorite nor the acidity of MMS1 leaching mercury out of your teeth. This is because any and all mercury that could possibly leach from the teeth will be instantly destroyed by the chlorine dioxide in the MMS1.

Further explanation of mercury: Should tiny amounts of mercury leach from any amalgam fillings during brushing with MMS1 the chlorine dioxide which is present in your teeth brushing solution will destroy the mercury compounds that comes from the fillings. The residue of this destruction is neutral and will wash out from the body completely. The fact is mercury compounds only stay in the body when MMS1 is not present.

The following user(s) said Thank You: Truthquester, fourfingerz

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf
Last Edit: by CLO2.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 22 Apr 2016 20:39 #52027

  • Tomas
  • Tomas's Avatar
  • Offline
  • Senior Boarder
  • Senior Boarder
  • Posts: 43
  • Thank you received: 93
Unfortunately, I am afraid, these are unproven claims.
In fact, chlorine dioxide cannot destroy mercury. But may oxidize the metal form (almost nontoxic mercury, Hg0) to very toxic ionic forms of mercury Hg+ and Hg2+.
The following user(s) said Thank You: Steve, Truthquester, CLO2

Please Log in or Create an account to join the conversation.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Jun 2016 14:20 #52567

  • Dawna
  • Dawna's Avatar
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 188
  • Thank you received: 199
I use sodium chlorite solution (MMS) without mixing or "activating" with HCL on my skin, even my face. It only burns off some of the spots, I recon they are the bad ones, the rest of my skin is untouched. I don't wash it off either until it is like white dust.
I had a black spot on my arm, I put it on, and it is gone completely.
When I mix the MMS with HCL or citric acid - and put it on my skin - nothing happens.
The following user(s) said Thank You: CLO2

Please Log in or Create an account to join the conversation.

SAFETY PRECAUTION - sodium chlorite solution by Jim Humble 21 Jun 2016 18:10 #52573

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1785
  • Thank you received: 1718
MMS (22.4% sodium chlorite solution) is very alkaline so can burn skin, in your case those spots. You can also use 35% hydrogen peroxide. Applying with a Q-Tip seems to be an accurate delivery method.

Be aware both can burn healthy skin, so be very careful! And keep both away from eyes.

If you make very strong CDS using the overnight method by adding new reactor solution to the same CDS many times, that can also work and even 24,000 ppm CDS won't bother healthy external skin. I have removed a skin cancer using such strong CDS and DMSO.
The following user(s) said Thank You: mariannhvw, Tomas

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf
  • Page:
  • 1
  • 2

us  forogenesis2.org - Foro Genesis II

Go to top