Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: YouTube Making CDS in my kitchen! Woohooo!

YouTube Making CDS in my kitchen! Woohooo! 19 Dec 2012 18:37 #28367

  • pam
  • pam's Avatar
  • Offline
  • Archbishop
  • Archbishop
  • Posts: 5647
  • Thank you received: 4405
Excellent way of making CDS here - very easy, with photos -

www.mmsinfo.org/infosheets/cds_making_shot_glass_method.pdf

read it through and then ask away - Charlotte has been doing the testing for you, but you can get testing strips if you want to "be sure" - Note that CDS has the smell, but not the taste of MMS.

Regarding the dosing with CDS - since it's so new, they're still finding out what works - will be honest. If you have a 3000ppm per liter mixture, then 1ml = 3 drops of MMS. I use a syringe without the needle - you can get one at the farm and pet store.

Some of the more recent work with CDS has indicated that higher doses are optimal for serious diseases - Andreas uses 10ml of 3000ppm CDS per dose for cancer - that's really a 30 drop equivalent - I know of others using similar dosing - maybe starting with 8ml and working up higher for cancer -
The following user(s) said Thank You: Rainbow Fighter

Please Log in or Create an account to join the conversation.

Archbishop - Genesis II Church of Health and Healing - Washington State
pam @ genesis2church.is (remove spacing)

Jim Humble's MMS Books
MMS Video Course
MMS Testimonials
MMS Newsletter

Easy, free way to support Jim Humble, Genesis II Church, MMS

YouTube Making CDS in my kitchen! Woohooo! 19 Dec 2012 22:15 #28371

  • Lockedout
  • Lockedout's Avatar
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 22
  • Thank you received: 3
I agree it just ain't clear. especially testing the strength.CDS

Please Log in or Create an account to join the conversation.

YouTube Making CDS in my kitchen! Woohooo! 19 Dec 2012 22:34 #28373

  • Lockedout
  • Lockedout's Avatar
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 22
  • Thank you received: 3
How does testing the end product, with a test strip rated 0 to 500, indicate a solution of 50,000 ppm?# when the reading is only showing a reading near 50+.

Please Log in or Create an account to join the conversation.

YouTube Making CDS in my kitchen! Woohooo! 19 Dec 2012 22:42 #28374

  • Lockedout
  • Lockedout's Avatar
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 22
  • Thank you received: 3
TG thanks for the video, really good try. Take care your drop counting needs some attention. It can make a difference.
regards.

Please Log in or Create an account to join the conversation.

YouTube Making CDS in my kitchen! Woohooo! 20 Dec 2012 01:05 #28378

  • pam
  • pam's Avatar
  • Offline
  • Archbishop
  • Archbishop
  • Posts: 5647
  • Thank you received: 4405
You test by proportion.

I usually test 1ml CDS to 59ml distilled water. The resulting reading I get, I multiply by 60.
Or if I test 1mL CDS to 19 ml distilled water, I multiply that reading by 20. So, if I get 300, then the final ppm is 6000ppm.

JH has spoken about testing 1ml CDS to 9 ml distilled water - then you would multiply the reading by 10. that works if you have CDS that is less than 5000ppm - once you get to 5000ppm (which you would get by a reading of 500 multiplied by 10) it's hard to tell how much above 5000 you can get.
The following user(s) said Thank You: Rainbow Fighter, Lockedout

Please Log in or Create an account to join the conversation.

Archbishop - Genesis II Church of Health and Healing - Washington State
pam @ genesis2church.is (remove spacing)

Jim Humble's MMS Books
MMS Video Course
MMS Testimonials
MMS Newsletter

Easy, free way to support Jim Humble, Genesis II Church, MMS
Last edit: by pam.
  • Page:
  • 1
  • 2
Go to top